Maeda MC285C-3 - LED Light Operations; After Crane Operation; Crane Stowing Operation; Stopping Operation by Remote Control System

M A E D A Mini-Crawler Crane Section 4 –AFTER CRANE OPERATION
1/2019 MC285C-3 4-105
LED Light Operations
Select the LED light on the menu screen to turn
the LED light on.
For more information on turning on the lights, see
“Transmitter Display Components” on page 4-87.
Fig. 4-283
1. LED light (front) ON/OFF
Fig. 4-284
2. LED light (operation panel) ON/OFF
Fig. 4-285
AFTER CRANE OPERATION
Crane Stowing Operation
CAUTION:
• We recommend using the levers on the
machine main unit to stow the crane.
Part of the crane stowage process can be
handled using the remote control system,
but the remote control system cannot be
used for boom stowage or hook stowage.
• For more information on crane stowage
operations, see “Crane Stowing Operation”
on page 4-61.
Stopping Operation by Remote
Control System
WARNING! When the operation is finished, be
sure to press the Emergency Engine Stop
(EMO)/Remote Control System Power OFF
Switch on the transmitter to turn OFF the
power.
WARNING! On no occasion except for crane
operations, must the power of the transmitter
be turned ON. This could cause unexpected
movement of the crane resulting in a serious
hazard, such that the crane hitting someone
or an object, or the crane could tip.
WARNING! When it is required to turn ON the
transmitter for the purpose of inspection or
such, ensure that the engine is not running.
1. Press the Emergency Engine Stop (EMO)/
Remote Control System Power OFF Switch
to turn off power.
The engine will shut down at the same time.
Fig. 4-286
2. Turn the Starter Switch on the machine main
unit to “OFF” to turn off power.