Maeda MC285C-3 - Inspection and Maintenance List; Pre-Start and Post-Start Inspection Items

Section 5 – AUXILIARY WINCH INSPECTION AND MAINTENANCE Mini-Crawler Crane M A E D A
5-78 1/2019 MC285C-3
Inspection and Maintenance List
This document only covers auxiliary winch kit. For crane body, please refer to “Inspection and
Maintenance” and follow its precautions.
Maintain in accordance with the laws and regulations of the relevant country and region.
Pre-Start and Post-Start Inspection Items
Inspection Item
Reference
Pre-Start – Before Starting Engine
Check Boom head, Frame and Hook
See “Boom Head, Frame and Hook” on page 5-79.
Installation Check of Position Pin and Lynch Pin
See “Position Pin and Lynch Pin” on page 5-79.
Check Wire Rope
See “Wire Rope” on page 5-79.
Check Over Winding Detector
See “Over Winding Detector” on page 5-79.
Check Winch Motor
See “Winch Motor” on page 5-79.
Check Winch Drum
See “Winch Drum” on page 5-79.
Post-Start – After Starting Engine
Check Over Winding Detector
See “Over Winding Detector” on page 5-79.
Check Over-Unwinding Stop Device
See “Over-Unwinding Stop Device” on page 5-79.
Check Moment Limiter for Operation
(Searcher Hook Mode)
See “Moment Limiter for Operation (Auxiliary Winch
Mode)” on page 5-80.
As Required
Replace Winch Wire Rope
See "Winch Wire Rope - Removal" on page 5-80.