Mazda BT-50 - Selecting a Preset Channel from the Preset Channel List; Searching in Scan Mode

5-5
AUDIO
NOTE
• To store the current listening station, touch and hold one of the preset buttons for
more than 1.5 seconds.
• When the new stations are set in the preset buttons, the previously set stations are
deleted.
• If the number of receivable stations is less than six, the rest of the buttons remain
in the initial values.
Selecting a preset channel from the preset channel list
1. Touch the desired preset channel in the preset channel list.
Searching in scan mode
1. Touch .
• The tuner searches for stations starting from the lowest frequency and
progressing toward higher frequencies. When a station with sufficiently strong
reception is found, it will be played for 5 seconds.
• To cancel scan mode, touch
/ or press .
NOTE
• When the button is displayed as , the scan function is activated.