Millipore Integritest Exacta - Table 14: Print Variables

Integritest Exacta Filter Integrity Test Instrument
Operating and Maintenance Manual Printing 137
INTRODUCTION
For information about the following topics, see the section titled Setup Options on page 83.
Some points of interest concerning Printing in this manual include the following:
Adding an External Printer........................................................pg. 45
Configurable Operator Input Options.......................................pg. 86
Choose a Default Printer ...........................................................pg. 87
Choose Report Format ...............................................................pg. 88
Printing Reports
Table 14: Print Variables
Available
Printouts:
Where Printing
Occurs:
How to Print: Print Preview
Available? Y/N
What is printed?
Test Reports
Test Progress
Screen
Print
automatically at
end of filter test.
Via print icon
No
Yes
Test Report for the
test that has just
been completed.
Data
Management
Screens
Via print icon Yes Test Report for the
stored test data that
has been chosen.
Calibration
Reports
Setup &
Calibration
Screen
Tab F3 for
Pressure
Calibration
Tab F4 for
Temperature
Calibration
Tab F5 for Leak
Testing
Via print icon on
toolbar (top of
screen)
No Calibration data
from the last
calibration that was
completed. It
includes the
previous calibration
coefficients and the
new calibration
coefficients.
Instrument
Registration
Information
Setup &
Calibration
Screen
Tab F6
Via print icon on
toolbar (top of
screen)
No Current registration
information.
Instrument
Configuration
(Instrument
setup
information)
Setup &
Calibration
Screen
Tab F2
Via print icon on
toolbar (top of
screen)
No Current instrument
configuration.
Event Logs
Database Log
Screen
Server Log Screen
Via print icon on
toolbar (top of
screen)
Via print icon on
No
No
The data from the
event log files (for
8.5” x 11” paper
size only).