Millipore Integritest Exacta - Figure 77: Setup and Calibration, Tab F5, Leak Testing; Figure 78: Leak Test Progress Report

Millipore System Documentation Set
196 Operating and Maintenance Manual Publication XITXSP121 P Rev.A
Figure 77: Setup and Calibration, Tab F5, Leak Testing
3. Click
to start an internal leak test. The leak test will run automatically, and will
display a progress window as shown in Figure 78.
Figure 78: Leak Test Progress Report
4. When the test is complete the results will be displayed on the screen (Figure 79).