Millipore Integritest Exacta - Introduction

Integritest Exacta Filter Integrity Test Instrument
Operating and Maintenance Manual Test Editor 115
INTRODUCTION
The Test Editor is a database containing filter test programs created by the user. New test
programs can be added or existing test programs can be modified. Each program is revision
controlled with a:
• Revision number
• Revision date
• Name of the user who last modified the test program
Test Editor Features
• Tests can be modified with revision control
• Typing is minimized by use of the filter database
Using the Test Editor
Programming a test in the test editor is very easy. Normally only four entries are required
because the filter integrity test specifications have already been entered into the filter database.
The test editor uses this information to define a test. See Table 10 for details
Table 10: Summary of Modifiable Test Editor Fields
Entry Value
required in
field?
Yes/No
Mandatory or
optional to modify
field when
programming a new
test?
Instructions Notes
Test Name
Yes Mandatory Location:
Tab F2
Type in a unique
test name.
This is a text field that is
the primary identifier of
a test program.
Description
No Optional Location:
Tab F2
Type in
additional
information
about the test if
desired.
This is a text field that is
for descriptive
purposes.