Integritest Exacta Filter Integrity Test Instrument
Operating and Maintenance Manual Error Messages 223
Table 28: General Error Messages
Scope/Screen Message Cause
Global Could not read access
values from Database. Using
default values.
Database Communication Error
Global Could not store access level
changes on the server.
Unable to Store the Access Levels
in the Database
Login Unable to connect to master
server
N/A
Login Exacta service is unavailable
on:
Network Login failure
Login The Exacta service on this
instrument is not currently
available
The server is not running or there is
a network error
Global There was a problem
printing to your printer.
Printer Failure
Global An instrument error has
occurred - The current
operation has been
terminated - Please consult
the event logs for more
details.
Generic Test Error
External Calibration
Dialog Box
A valid referee value is
required
An Invalid Referee Value Was
Entered
External Calibration
Dialog Box
The referee temperature
specified is out of range.
Invalid Temperature Value Entered
External Calibration
Dialog Box
The referee pressure
specified is out of range.
Invalid Pressure Value Entered
Test Progress Screen The test version you are
trying to run is not available
on Server
The Test you tried to run is not
valid for some reason
Test Progress Screen The test version you are
trying to re-run is not
available on Server
The Test you tried to re-run is not
valid for some reason
Test Progress Screen The raw data for the old test
is missing from the database.
The data for the Test you
attempted to rerun could not be
found on the server
Test Progress Screen Unable to abort test Unable to abort the test for some
reason
Test Progress Screen The instrument is not
currently available.
Instrument Not Available
Lock Out Form Are you absolutely sure that
you want to unlock this
instrument?
You are about to unlock the
instrument
Lock Out Form The instrument is not
currently available.
Instrument Not Available
To Next Page
Loading...
