Integritest Exacta Filter Integrity Test Instrument
Operating and Maintenance Manual Instrument Setup 83
SETUP OPTIONS
The setup options define many of the general operating and testing parameters for the
Instrument. These include configurations for setting up the following areas:
• Language Interface
• Operator Input Screen
• Default Printer Selection
• Test Report Format Options
• Pressure Units
• Instrument Description
• Temperature Compensation
• User Access Levels
• Add Users
• Adding an External Printer
• Setting the Time and Date
• Filter Editor
• Filter Test Procedures
General Setup Procedures
Instrument Setup Procedures are conducted in multiple locations (Table 3).
Table 3: Instrument Setup Locations
Setup Locations Corresponding Setup Operations
Print Setup Screen Interface Language
Operator Input
Test Report Options
Default Printer Selection
Setup & Calibration Screen Choosing Pressure Units
Instrument Description
Temperature Compensation
User Operations Screen User Operations and Access Levels
Within the embedded Windows
NT Operating System
Adding an External Printer
Setting the Time and Date
Filter Editor* Entering Filter Specifications
Filter Editor
Test Editor* Filter Test Procedures
* Note: The Filter Editor and Test Editor have detailed setup and use instructions in this
manual. Please refer to the section titled Filter Editor on page 91, and the Test Editor section on
page 111 for details.
To Next Page
Loading...
