Millipore Integritest Exacta - Performance Specifications

Millipore System Documentation Set
242 Operating and Maintenance Manual Publication XITXSP121 P Rev.A
PHYSICAL CHARACTERISTICS
Dimensions
Table 33: Dimensions
Height
8 inches 21cm
Width
19 inches 49cm
Depth
21 inches 54cm
Weight
• ≤ 40lb. (≤ 18kg)
Electrical Specifications
• Voltage Range - 100–240 VAC
• Frequency - 50–60 Hz
• Current Rating - 2 amps @ 100 VAC
• Main Supply Voltage not to exceed ±10% of nominal voltage, 100–240 volts AC at 50–
60Hz
• Conforms to IEC664 Installation Category II specifications
Fuse Rating
• 2 amp slow blow (delayed action), 250v, 5 x 20 mm
Input and Output connections
• 1 RS-232/422 COM Port (Serial port)
• 1 Parallel port, DB 25 pin (External printer)
• 1 Sensor Connector
• Ethernet connector
Computer
• Full-function membrane keyboard containing membrane pointing device and numeric
keypad.
• Active-color-matrix LCD display.
• 640 x 480 (or better) active-color-matrix display adapter. VGA output.
• CPU microprocessor, Pentium
®
class 266 MHz or faster, ≥ 64MB RAM.
• Analog-to-digital converter board.
• 3.5”, 1.4MB disk drive.
• Hard Disk Drive: 6 GB capacity or greater.
• Printer: 3” inkjet printer, 40 characters/line, using 3” plain-paper roll.