2-83
2.2.36 aclstats
Priviledge / Global Config
This command displays the statisitcs of all the access lists configured on the switch.
Syntax
aclstats [<name>|fe|ge <1-4>|sa <1-4>|tunnel <1-32>|vlan <1-4094>]
Parameters
Example
RFS7000(config)#interface fe
RFS7000(config-if)#
RFS7000(config)#interface ge 3
RFS7000(config-if)#
RFS7000(config)#interface sa 2
RFS7000(config-if)#
RFS7000(config)#interface tunnel 27
RFS7000(config-if)#
RFS7000(config)#interface vlan 400
RFS7000(config-if)#
IFNAME Interface name.
fe FastEthernet interface.
ge <1-4> GigabitEthernet interface. Select an index value between 1-4.
sa <1- 4> StaticAggregate interface. Select an index value between 1-4.
tunnel <1-32> Tunnel interface. Select from an index value between 1-32.
vlan <1-4092> VLAN interface. Select from an index value between 1- 4092.