5-47
5.1.27 service
Global Configuration Commands
Use this command to retrieve system data (tables, log files, configuration, status and operation) for use in
debugging and problem resolution.
Syntax
service(advanced-vty|dhcp|password-encryption|
pm (max-sys-restarts<1-5>|sys-restart)|
prompt(crash-info)|radius(restart)|set|show (cli)|terminal-length <0-512>)
service set ( command-history <10-300>|reboot-history <10-100>|
upgrade-history <10-100>)
Parameters
advanced-vty Enables the advanced mode vty interface.
dhcp Enables the DHCP Server.
password-encryption Encrypts passwords.
pm
(max-sys-restarts<1-5>|
sys-restart)
Process Monitor.
• max-sys-restarts – Maximum number of PM restarts because of a failed
processes. Select a value between 1 and 5.
• sys-restart – Enables PM to restart the system when a processes fails.
Note The process restart is one count less than what is configured.
prompt (crash-info) Enables crash-info prompt.
radius (restart) Enables the RADIUS server.
set
(command-history
<10-
300>
|
reboot-history
<10-100>|
upgrade-history
<10-
100>
)
Sets service parameters.
• command-history – Sets the size of the command history (default: 200).
• reboot-history – Sets the size of the reboot history (default: 50).
• upgrade-history – Sets the size of the upgrade history (default: 50).
show cli Shows the CLI tree of the current mode.
terminal-length <0-512> System wide terminal length configuration. Select a value between 0 - 512. This
sets the number of lines of VTY (0 means no line control).
To Next Page
Loading...
