Overview
4-8
4.1.4 change-passwd
Priv Exec Command
Use this command to change the password of the logged in user.
Syntax
change-passwd
Parameters
None.
Usage Guidelines
A password must be between 8 to 32 characters in length. For safety, the console does not display the user
entered key words (refer example) for the
old password and new password fields.
Ensure the console displays the password successfully changed message.
Example
RFS7000#change-passwd
Enter old password:
Enter new password:
Password for user 'admin' changed successfully
RFS7000#
NOTE The console, by default, does not display any user entered keyword for the old
pasword and new password fields.
Leaving the
old password and new password fields empty displays the
following error message:
Error: Invalid password length. It should be between 8 - 32
characters.
To Next Page
Loading...
