Motorola RFS7000 Series - Group; End; Exit

Overview
19-10
19.1.7.2 end
RADIUS Configuration Commands
Use this command to exit the current mode and move to the PRIV EXEC mode. The prompt changes to
RFS7000#.
Syntax
end
Parameters
None.
Example
RFS7000(config-radsrv-group)#end
RFS7000#
19.1.7.3 exit
RADIUS Configuration Commands
Use this command to exit the current mode and move to the previous mode (config-radsrv)). The prompt
changes to
RFS7000(config)#.
Syntax
exit
Parameters
None.
Example
RFS7000(config-radsrv-group)#exit
RFS7000(config-radsrv)#
19.1.7.4 group
RADIUS Configuration Commands
Use this command to configure RADIUS user group paramaters. This command creates a group within an
exisitng RADIUS group.
Syntax
group
Parameters
Example
RFS7000(config-radsrv)#group TestGroup
RFS7000(config-radsrv-group)#
WORD RADIUS group name.