4-35
4.1.28 rename
Priv Exec Command
Use this command to rename a file in the existing filesystem.
Syntax
rename FILE FILE
Parameters
Example
RFS7000#rename flash:/TestDIR/ NewTestDir
RFS7000#DIR
Directory of flash:/
drwx 1024 Wed Jul 19 19:14:05 2006 hotspot
drwx 120 Wed Aug 30 15:32:44 2006 log
drwx 1024 Thu Aug 31 23:50:09 2006 crashinfo
-rw- 14271 Tue Jul 25 15:16:41 2006 Radius-config
-rw- 14271 Wed Jul 26 15:42:08 2006 flash:
drwx 1024 Wed Aug 9 17:35:08 2006 radius
-rw- 3426 Wed Jul 26 16:08:02 2006 running-config-new
-rw- 13163 Wed Jul 26 16:08:42 2006 radius-config
-rw- 80898 Thu Aug 17 14:59:39 2006 cli_commands.txt
-rw- 65015 Fri Aug 11 19:57:37 2006 cli_commands.txtli_commands.txt
-rw- 65154 Thu Aug 17 15:11:23 2006 cli_commands_180B.txt
-rw- 32 Sat Sep 2 00:15:38 2006 cli_commands.save
drwx 1024 Sat Sep 2 00:31:24 2006 NewTestDir
RFS7000#
FILE FIle to rename.