Motorola RFS7000 Series User Manual

2-59
2.2.21 redundancy-group
Common to all modes
This command displays the switch’s IP address, number of active neighbors, group license, installed license,
cluster AP adoption count, switch adoption count, hold time, discovery time, heartbeat interval, cluster id,
switch mode etc.
In a cluster, this command displays the redundancy runtime and configured information of the self-switch. Use
config parameter to view only configuration information and/or runtime parameter to view runtime
information.
Syntax
show redundancy-group [config|runtime]
Parameters
Example
RFS7000(config)#show redundancy-group
Redundancy Group Configuration Detail
Redundancy Feature : Disabled
Redundancy group ID : 1
Redundancy Mode : Standby
Redundancy Interface IP : 0.0.0.0
Number of configured peer(s) : 0
Heartbeat-period : 5 Seconds
Hold-period : 15 Seconds
Discovery-period : 30 Seconds
Handle STP : Disabled
Switch Installed License : 256
Switch running image version : 1.1.0.0-36536X
Auto-revert-period : 5 mins
Auto-revert Feature : Enabled
DHCP-Server Redundancy : Disabled
Redundancy Group Runtime Information
Redundancy Protocol Version : 2.0
Redundancy Group License : 0
Cluster AP Adoption Count : Not Applicable
Switch AP Adoption Count : Not Applicable
Redundancy State : Disabled
Radio Portals adopted by Group : Not Applicable
Radio Portals adopted by this Switch : Not Applicable
Rogue APs detected in this Group : Not Applicable
Rogue APs detected by this Switch : Not Applicable
MUs associated in this Group : Not Applicable
MUs associated in this Switch : Not Applicable
Selfhealing RPs in this Group : Not Applicable
Selfhealing APs in this Switch : Not Applicable
Group maximum AP adoption capacity : Not Applicable
Switch Adoption capacity : Not Applicable
Established Peer(s) Count : Not Applicable
Redundancy Group Connectivity status : Not Applicable
DHCP Server in group : Not Applicable
RFS7000(config)#
RFS7000(config)#show redundancy-group config
Redundancy Group Configuration Detail
Redundancy Feature : Disabled
Redundancy group ID : 1
config Displays redundancy group information.
runtime Displays runtime redundancy group information.

Motorola RFS7000 Series Specifications

General

Brand	Motorola
Model	RFS7000 Series
Category	Switch
Language	English