DHCP Class Instance
Use (config)#ip dhcp class <class name> to enter (config-dhcpclass)instance. Use this instance to
configure the DHCP user class. The switch supports a maximum of 8 user classes per DHCP class.
Also refer ip on page 5-28 and DHCP Instance on page 17-1 for other DHCP related configurations.
18.1 DHCP Server Class Config Commands
Command Description Ref.
clrscr Clears the display screen. page 18-2
end Ends the current mode and moves to the EXEC mode. page 18-2
exit Ends the current mode and moves to the previous mode. page 18-2
help Displays the interactive help system. page 18-3
multiple-user-class Enables multiple user class option. page 18-3
no Negates a command or set its defaults. page 18-3
option Configures DHCP Server options. page 18-4
service Displays service Commands. page 18-5
show Displays running system information. page 18-6
To Next Page
Loading...
