19-11
19.1.7.5 guest-group
RADIUS Configuration Commands
Use this command to manage a guest-user linked with a hotspot. Additionally, create a guest-user and
associate it with a guest-group. The guest-user and the policies of the guest-group are used for hotspot
authentication.
Syntax
guest-group
Parameters
Usage Guidelines
Use this command to create a guest group. The guest user created using rad-user must only be part of the
guest group.
Example
RFS7000(config-radsrv-group)#guest-group enable
RFS7000(config-radsrv-group)#
19.1.7.6 help
RADIUS Configuration Commands
Use this command to access the system’s interactive help system.
Syntax
help
Parameters
None.
Example
RFS7000(config-radsrv-group)#help
CLI provides advanced help feature. When you need help,
anytime at the command line please press '?'.
If nothing matches, the help list will be empty and you must backup
until entering a '?' shows the available options.
Two styles of help are provided:
1. Full help is available when you are ready to enter a
command argument (e.g. 'show ?') and describes each possible
argument.
2. Partial help is provided when an abbreviated argument is entered
and you want to know what arguments match the input
(e.g. 'show ve?'.)
RFS7000(config-radsrv-group)#
19.1.7.7 no
RADIUS Configuration Commands
Use this command to negate a command or set defaults.
Syntax
no(policy|rad-user|service)
no policy(day|time|vlan|wlan)
no policy wlan(<1-32>|all)<1-32>
enable Enables this group as guest group.