Overview
2-66
2.2.26 sole
Common to all modes
Syntax
show sole (config|stats|status)
show sole (config|stats)(adapter)(ADAPTER NAME)
show sole (status)[adapter|engine (ADAPTER)]
Parameters
Example
RFS7000(config)#show sole config adapter
SOLE Adapter
Adapter Type: AeroScout
Adapter Version: 2.01
Configured Status: disabled Operational Status: disabled
Adapter Build Time: Mon Oct 8 16:12:48 2007
RFS7000(config)#
RFS7000(config)#show sole stats adapter
Adapter Type: AeroScout Adapter Status: enabled
Number of messages received from engine : 0
Number of messages sent to engine : 0
Number of tag reports sent to engine : 0
Time at which last message was received from engine : -
Time at which last message was sent to engine : -
RFS7000(config)#
RFS7000(config)#show sole status adapter
# Type Status
-----------------------------
1 AeroScout enabled
RFS7000(config)#
RFS7000(config)#show sole status engine
Type Engine State
-------------------------------------------
AeroScout 0.0.0.0 Idle
RFS7000(config)#
config (adapter)
(ADAPTER NAME)
Displays SOLE configuration information.
• adapter – Displays configuration for all of specific SOLE adapters.
stats (adapter)
(ADAPTER NAME)
Displays adapter specific statistics such as : Number of tag reports sent, number
of MU reports sent.
• adapter – Displays statistics for adapter.
status [adapter|engine
(ADAPTER)]
Displays SOLE status information.
• adapter – Displays status for SOLE adapters.
• engine (ADAPTER) – Displays external location engine status for adapter.