Motorola RFS7000 Series - Service

Overview
13-10
13.1.9 service
mst Config commands
Use this command to invoke the service commands needed to trobuleshoot or debug (config-if) instance
configurations.
Syntax
service(show) (cli)
Parameters
Example
RFS7000(config-mst)*#service show cli
MSTI configuration mode:
+-bridge
+-instance
+-<1-15> [bridge instance <1-15>]
+-vlan
+-<1-4094> [bridge instance <1-15> vlan <1-4094>]
+-region
+-REGION_NAME [bridge region REGION_NAME]
+-revision
+-REVISION_NUM [bridge revision REVISION_NUM]
+-clrscr [clrscr]
+-end [end]
+-exit [exit]
+-help [help]
+-no
+-bridge
+-instance
+-<1-15> [no bridge instance <1-15>]
+-vlan
+-<1-4094> [no bridge instance <1-15> vlan <1-4094>]
+-region [no bridge region]
+-revision [no bridge revision]
+-quit [quit]
+-s
+-commands [show commands]
+-WORD [show commands WORD]
+-running-config [show running-config]
+-full [show running-config full]
+-include-factory [show running-config include-factory]
+-service
+-show
+-cli [service show cli]
+-show
+-access-list [show access-list]
+-<1-99> [show access-list (<1-99>|<100-199>|<1300-1999>|<2000-2699>|WORD)]
+-<100-199> [show access-list (<1-99>|<100-199>|<1300-1999>|<2000-
2699>|WORD)]
+-<1300-1999> [show access-list (<1-99>|<100-199>|<1300-1999>|<2000-
2699>|WORD)]
+-<2000-2699> [show access-list (<1-99>|<100-199>|<1300-1999>|<2000-
.................................................................................
.................................................................................
.................................................................................
.......................
RFS7000(config-mst)#
show (cli) Shows running system information.
• cli –
Show CLI tree of current mode.