Motorola RFS7000 Series - Redundancy-History

2-61
2.2.22 redundancy-history
Common to all modes
This command displays the history of the state transition by the RFS7000 switch. In a cluster, this command
displays the history of the switch state transitions of the self-switch.
Syntax
show redundancy-history
Parameters
None.
Example
RFS7000(config)#show redundancy-history
State Transition History
Time Event Triggered State
---------------------------------------------------------
Sep 18 09:57:36 2007 Redundancy Enabled Startup
Sep 18 09:57:36 2007 Startup Done Startup
Sep 18 09:57:36 2007 Discovery Done Startup
Sep 18 09:57:36 2007 Redundancy Disabled Startup
RFS7000(config)#