Overview
5-64
5.1.30 sole
Global Configuration Commands
Use this command to configure Smart Opportunistic Location Engine (SOLE) related configuration commands.
This command leads you to the
(config-sole)# instance. For more information on SOLE related
parameters, refer to SOLE Instance on page 21-1
Syntax
sole
Parameters
None.
Usage Guidelines
The SOLE command is used to enter the (config-sole) instance. The prompt changes from the regular
RFS7000(config)# to RFS7000(config-sole)#.
Example
RFS7000(config)#sole
RFS7000(config-sole)#
To Next Page
Loading...
Need help?
General
