Overview
3-12
3.1.9 show
User Exec Commands
Use this command to exit the current mode and go down to previous mode.
Syntax
show
Parameters
autoinstall Displays the autoinstall configuration.
banner Displays the “Message of the Day Login” banner.
commands Displays command lists.
crypto Displays encryption details.
environment Displays environment information.
history Displays the session command history.
interfaces Displays interface status.
ip Displays the Internet Protocol (IP) address.
ldap Displays LDAP server details.
licenses Displays any installed licenses details.
logging Displays the logging configuration and buffer information.
mac Displays MAC access-list assignment.
mac-address-table Displays the MAC address table.
management Displays L3 Managment Interface name.
mobility Displays mobility parameters.
ntp Displays the network time protocol.
port-channel Displays port channel commands.
privilege Displays the current privilege level.
radius Displays RADIUS configuration commands.
redundancy-group Displays redundancy group parameters.
redundancy-history Displays the state transition history of the switch.
redundancy-members Displays redundancy group members in detail.
snmp Displays SNMP engine parameters.
snmp-server Displays SNMP Server parameters.
sole Displays Smart Opportunistic Location Engine (SOLE) configuration.
spanning-tree Displays spanning-tree information.
To Next Page
Loading...
Need help?
General
