Overview
11-30
11.1.10 password
Trustpoint Config commands
Use this command to set the challenge password, applicable only for trustpoint access requests.
Syntax
password(0|2|WORD)
Parameters
Example
RFS7000(config-trustpoint)#password 0 TestPassword
RFS7000(config-trustpoint)#
0 Password is specified as UNENCRYPTED. The password must be between 4 - 20
characters.
2 Password is encrypted with a password-encryption secret. The string length of
an encrypted password must be between 44 - 64 characters.
WORD Password (4 - 20 characters).
To Next Page
Loading...
Need help?
General
