Motorola RFS7000 Series - Chapter 20. Wireless Instance; Aap

Overview
20-4
20.1.1 aap
Wireless Configuration Commands
Use this command to configure adaptive AP parameters.
Syntax
aap [config-apply (def-delay|mesh-delay)<30-10000>
Parameters
Example
RFS7000(config-wireless)#aap config-apply def-delay 100
RFS7000(config-wireless)#
RFS7000(config-wireless)#aap config-apply mesh-delay 100
RFS7000(config-wireless)#
config-apply (def-
delay|mesh-delay)
<30-10000>
Apply Configuration settings.
• def-delay <30-10000> – Default time (in seconds) to delay before applying
config.
• mesh-delay <30-10000> – Time to delay (in seconds) before applying config
to Mesh APs