20-53
20.1.35 wlan
Wireless Configuration Commands
Use this command to configure Wireless LAN related commands.
Syntax
wlan(<1-256>|WLAN)
(80211-extensions|accounting|add-vlan|answer-bcast-ess|authentication-
type|client-bridge-backhaul| description|dot11i|enable|encryption-type|
hotspot|inactivity-timeout|kdc|mobility|mu-mu-disallow|nac-mode|nac-server|qos|
radius|secure-beacon|set-vlan-user-limit|ssid|syslog|vlan|wep128|wep64)
wlan<1-256> (80211-extensions)( move-command)(enable)
wlan <1-256> (accounting)(none|radius|ssyslog)
wlan<1-256> (add-vlan)[<1-4094>|VLAN] (limit)<0-8192>
wlan <1-256> authentication-type(eap|hotspot|kerberos|mac-auth|none)
wlan<1-256> (client-bridge-backhaul)(enable)
wlan <1-256> (dot11i)(handshake|key|key-rotation|key-rotation-interval|
opp-pmk-caching|phrase|pmk-caching|preauthentication|second-key|
tkip-cntrmeas-hold-time|wpa2-tkip)
wlan <1-256> (dot11i) (handshake) timeout<100-5000> retransmit<1-10>
wlan <1-256> key(0|2|WORD)
wlan <1-256> (encryption-type)(ccmp|keyguard|none|tkip|tkip-ccmp|
wep128|wep128-keyguard|wep64)
wlan <1-256> hotspot(allow-list|webpage|webpage-location)
wlan <1-256> hotspot allow-list(Rule index)(IP address)
wlan <1-256> hotspot webpage(external|internal)(failure|login|welcome)
wlan <1-256> hotspot webpage-location(advanced|external|internal)
wlan <1-256> kdc(password(0||LINE)|realm(LINE)|server(primary|secondary|timeout))
wlan <1-256> kdc server (primary|secondary|timeout)auth-port<1-65535>
wlan<1-256> nac-mode [bypass-nac-except-include-list|do-nac-except-exclude-
list|none]
wlan<1-256> nac-server [primary|secondary|timeout]
wlan<1-256> nac-server [primary|secondary][A.B.C.D (auth-port) <1024-65535>|
radius-key (0|2|Shared Secret)]
wlan<1-256> nac-server [timeout] <1-300>
wlan <1-256> qos(classification|mcast-with-dot11i (enable)|mcast1 |
mcast2|prioritize-voice|svp|weight <1-10>|wmm)
wlan <1-256> qos classification(background|best-effort|video|voice|weight <1-10>|
wmm)
wlan <1-256> qos wmm(8021p|background|best-effort|dscp|video|voice)
(aifsn|cw|txop-limit|acm)
wlan <1-256> radius(accounting|authentication-protocol|dscp|
dynamic-authorization|dynamic-vlan-assignment|mac-auth-format|
mobile-unit|reauth|server)
wlan <1-256> radius accounting(mode|timeout)
wlan <1-256> radius accounting mode(start-interim-stop(interval)
<60-3600>|start-stop|stop-only|)
wlan <1-256> radius accounting timeout<1-60> retransmit<1-100>
To Next Page
Loading...
Need help?
General
