Overview
20-46
20.1.33 service
Wireless Configuration Commands
Use this command to invoke service commands to troubleshoot or debug the (config-wireless) instance
configuration.
Syntax
service(show|wireless)
service show (cli)
service show wireless [ap-history <accessport MAC address>|
buffer-counters|enhanced-beacon-table|enhanced-probe-table|legacy-load-balance|
mu-cache-buckets|mu-cache-entry|mvlan|radio (<1-4096>|description|mapping)|snmp-
trap-throttle]
service wireless [ap-history|buffer-counters|clear-ap-log<1-256>|dump-
core|enhanced-beacon-table|enhanced-probe-table|idle-radio-send-multicast|
legacy-load-balance| radio-mic-cfg|rate-scale|
request-ap-log <1-256>|save-ap-log|snmp-trap-throttle]
Parameters
show
Shows running system information.
cli
Shows the CLI tree of the current mode.
wireless
Wireless parameters.
service (show) wireless
ap-history
< AP MAC Address>
Access port serviceability parameters. Use history to access port history. The
following options can be used to access ap-history:
• XX-XX-XX-XX-XX-XX – Access port MAC.
buffer-counters
Allocation counts for various buffers.
enhanced-beacon-table
[config|report]
This command displays the details of the configuration and the information
gathered for AP locationing.
• config – Displays the configuration of AP locationing.
• report – Displays the information gathered for AP locationing.
enhanced-probe-table
[config|report]
This command displays the details of the configuration and the information
gathered for MU locationing.
• config – Displays the configuration of MU locationing.
• report – Displays the information gathered for MU locationing
legacy-load-balance
legacy load balance algorithm compatibility mode
mu-cache-buckets
This command displays the wireless mobile units cache buckets.
mu-cache-entry
This command displays the mobile units cache information.
mvlan
Multi-Vlan Debug stats.
radio (<1-4096>|
description|mapping)
Radio serviceability parameters.
• <1-4096> – A single radio index.
• description – Description and location co-ordinates of radios.
• mapping – Radio-to-CPU Mapping.