Motorola RFS7000 Series - Ntp

Overview
5-40
5.1.23 ntp
Global Configuration Commands
Use this command to configure NTP.
Syntax
ntp(access-group|authenticate|authentication-key|autokey|
broadcast|broadcastdelay|master|peer|server|trusted-key)
ntp access-group(peer|query-only|serve|serve-only)
ntp access-group peer(<1-99>|<1300-1999>)
ntp access-group query-only(<1-99>|<1300-1999>)
ntp access-group serve(<1-99>|<1300-1999>)
ntp access-group serve-only(<1-99>|<1300-1999>)
ntp authenticate
ntp authentication-key <1-65534>
ntp autokey(client-only|host)
ntp broadcast(client|destination)
ntp broadcast destination(<name>(key<1-65534>|version<1-4>))
ntp broadcastdelay <1-999999>
ntp master <1-15>
ntp peer<name>
ntp peer <name>(autokey|key|prefer|version)
ntp peer <name> autokey(prefer|version<1-4>)
ntp peer <name> key(<1-65534>(prefer|version(<1-4>)))
ntp peer <name> prefer (version<1-4>)
ntp peer <name> version<1-4>
ntp server<Peer IP>
ntp server <Peer IP>(autokey|key|prefer|version)
ntp server <Peer IP> autokey(prefer|version<1-4>)
ntp server <Peer IP> key(<1-65534>(prefer|version(<1-4>)))
ntp server <Peer IP> prefer (version<1-4>)
ntp server <Peer IP> version<1-4>
ntp trusted-key <1-65534>