Motorola RFS7000 Series User Manual

5-71
5.1.35 wireless
Global Configuration Commands
Use this command to configure switch wireless parameters. This command leads moves to the
config-wireless instance. For additional information, see Wireless Instance on page 20-1.
Syntax
wireless
Parameters
None.
Usage Guidelines
The wireless command is used to enter the config-wireless instance. The prompt changes from the regular
RFS7000(config)# to RFS7000(config-wireless)#.
Example
RFS7000(config)#wireless
RFS7000(config-wireless)#

Motorola RFS7000 Series Specifications

General

Brand	Motorola
Model	RFS7000 Series
Category	Switch
Language	English