Motorola RFS7000 Series - Autoinstall

5-11
5.1.3 autoinstall
Global Configuration Commands
Use this command to autoinstall the switch image.
Syntax
autoinstall [clear-config-history|cluster-config|config|image|reset-config|start]
autoinstall (cluster-config|config|image) (URL[tftp|ftp|http|cf|usb1|usb2])
autoinstall image version <number>
Parameters
Example
RFS7000(config)#autoinstall cluster-config url ?
URL Remote/external location of the file
URLs: tftp://<hostname:port or IP>/path/file
ftp://<user>:<passwd>@<hostname:port or IP>/path/file
http://<hostname:port or IP>/path/file
cf:/path/file
usb1:/path/file
usb2:/path/file
RFS7000(config)#
RFS7000(config)#autoinstall config url ?
URL Remote/external location of the file
URLs: tftp://<hostname:port or IP>/path/file
ftp://<user>:<passwd>@<hostname:port or IP>/path/file
http://<hostname:port or IP>/path/file
cf:/path/file
usb1:/path/file
usb2:/path/file
RFS7000(config)#
RFS7000(config)#autoinstall image url ?
URL Remote/external location of the file
URLs: tftp://<hostname:port or IP>/path/file
ftp://<user>:<passwd>@<hostname:port or IP>/path/file
http://<hostname:port or IP>/path/file
cf:/path/file
usb1:/path/file
usb2:/path/file
RFS7000(config)#
RFS7000(config)#autoinstall clear-config-history
RFS7000(config)#
clear-config-history Autoinstalls a clear configuration history, resulting in a reversion.
cluster-config Autoinstalls a cluster-config setup.
config Autoinstalls a config setup.
image <version number> Autoinstalls the image setup.
• Version number – The version number cannot be the same as the installed
version number. Attempting to install the same version results in an
unsuccesfull download.
start Starts the autoinstall sequence.