Motorola RFS7000 Series - Rate-Limit

Overview
20-42
20.1.30 rate-limit
Wireless Configuration Commands
Use this command to set default rate limit per user.
Syntax
rate-limit [down|up] <0-100000>
Parameters
Example
RFS7000(config-wireless)#rate-limit down 1000
RFS7000(config-wireless)#
RFS7000(config-wireless)#rate-limit up 20000
RFS7000(config-wireless)#
down <0-100000> Up link direction - From wireless client to network. Defined in the range of
<0-100000> kbps, 0=disable rate limit.
up <0-100000> Down link direction - From network to wireless client. Defined in the range of
<0-100000> kbps, 0=disable rate limit.