Motorola RFS7000 Series User Manual

Overview
4-42
4.1.33 upgrade
Priv Exec Command
Use this command to upgrade the switch software image.
Syntax
upgrade URL (background|)
Parameters
Example
RFS7000#upgrade ?
URL Location of firmware image
URLs: tftp://<hostname:port or IP>/path/file
ftp://<user>:<passwd>@<hostname:port or IP>/path/file
http://<hostname:port or IP>/path/file
sftp://<user>@<hostname:port or IP>/path/file
cf:/path/file
usb1:/path/file
usb2:/path/file
RFS7000#upgrade
RFS7000#upgrade tftp://xxx.xxx.xxx.xxx:/img
var2 is 10 percent full
/tmp is 2 percent full
Free Memory 161896 kB
FWU invoked via Linux shell
Running from partition /dev/hda5, partition to
update is /dev/hda6
Reading image file header
Removing other partition
Sep 08 15:57:18 2006: %KERN-6-INFO: EXT3 FS on
hda1, internal journal.
Making file system
Extracting files (this can take some time).Sep
08 15:57:23 2006: %KERN-6-INFO:
kjournald starting. Commit interval 5 seconds.
Sep 08 15:57:23 2006: %KERN-6-INFO: EXT3 FS on
hda6, internal journal.
Sep 08 15:57:23 2006: %KERN-6-INFO: EXT3-fs:
mounted filesystem with ordered
data mode..
.........................
Sep 08 15:58:17 2006: %DIAG-4-CPULOAD: One
minute average load limit exceeded,
value is 100.00% limit is 99.90% (top process
kernel/ISR 100.00%)
Sep 08 15:58:44 2006: %PM-4-PROCNORESP: Process
"logd" is not responding
Sep 08 15:58:44 2006: %PM-4-PROCNORESP: Process
"logd" is not responding
Sep 08 15:58:44 2006: %PM-4-PROCNORESP: Process
URL Defines location of firmware image.

Motorola RFS7000 Series Specifications

General

Brand	Motorola
Model	RFS7000 Series
Category	Switch
Language	English