20-17
20.1.12 country-code
Wireless Configuration Commands
Use this command to configure the country of operation. This command erases the radio’s existing
configuration.
Syntax
country-code <country-code>
Parameters
Usage Guidelines
Use the show wireless country-code command to view the list of supported countries.
Example
RFS7000(config)#country-code us
WARNING: Select only the country in which you are using the device.
Any other selection may make the operation of this device illegal.
RFS7000(config)#
country-code Uses the two letter ISO-3166 country code ("show wireless country-code-list")
to view the list of supported countries.
To Next Page
Loading...
Need help?
General
