Overview
2-62
2.2.23 redundancy-members
Common to all modes
This command displays the switches in the cluster which are all seen by the RFS7000 switch. The user can
provide the IP address of the switch in cluster whose information alone is needed.
Syntax
show redundancy-members (A.B.C.D)
Parameters
Example
RFS7000(config)#show redundancy-members brief
Member ID (Self) : 10.10.10.10
Member State : Not Applicable
Member ID : 10.10.10.1
Member State : Peer Configured
A.B.C.D IP address of the member switch.
To Next Page
Loading...
