Motorola RFS7000 Series User Manual

DHCP Instance
Use the (config-dhcp)instance to configure the DHCP server address pool associated with the switch. Use
ip dhcp pool (pool name) command to reach (config-dhcp) instance.
17.1 DHCP Config Commands
Table 17.1 summarizes config-std-nacl commands.
Table 17.1 DHCP Server Config Command Summary
Command Description Ref.
address Configures the DHCP server include range. page 17-3
bootfile Assigns a boot file name. The bootfile name can contain letters,
numbers, dots and hyphens. Consecutive dots and hyphens are not
permitted.
page 17-4
class Configures DHCP server class page 17-5
client-identifier Uses an ascii string as a client identifier. page 17-7
client-name Assigns a client name. page 17-8
clrscr Clears the display screen. page 17-9
ddns Configures Dynamic DNS. page 17-10
default-router Configures the default router’s IP address. page 17-11
dns-server Configures the IP address for the DNS Server. page 17-12

Motorola RFS7000 Series Specifications

General

Brand	Motorola
Model	RFS7000 Series
Category	Switch
Language	English