iv RFS7000 Series CLI Reference Guide
Conventions Used in this Guide
This section describes the following topics:
• Annotated Symbols
• Notational Conventions
Annotated Symbols
The following document conventions are used in this document:
Chapter 10, “Crypto - map Instance” Summarizes the crypto-map commands within the RFS7000 Switch CLI.
Chapter 11, “Crypto - trustpoint
Instance”
Summarize the
(crypto-trustpoint) commands within the RFS7000 Switch CLI.
Chapter 12, “Interface Instance” Summarize the
(config-if) commands within the RFS7000 Switch CLI.
Chapter 13, “Spanning Tree-MST
Instance”
Summarize the
(config-mst) commands within the RFS7000 Switch CLI.
Chapter 14, “Extended ACL Instance” Summarize the
(config-ext-nacl) commands within the RFS7000 Switch CLI.
Chapter 15, “Standard ACL Instance” Summarize the
(config-std-nacl) commands within the RFS7000 Switch CLI.
Chapter 16, “Extended MAC ACL
Instance”
Summarize the
(config-ext-macl) commands within the RFS7000 Switch CLI.
Chapter 17, “DHCP Instance” Summarize the
(config-dhcp pool) commands within the RFS7000 Switch CLI.
Chapter 18, “DHCP Class Instance”
Summarize the (config-dhcp-class)instance commands within the RFS7000 Switch CLI.
Chapter 19, “RADIUS Server Instance”
Summarize the (config-radsrv)instance commands within the RFS7000 Switch CLI.
Chapter 20, “Wireless Instance”
Summarize the (config-wireless)instance commands within the RFS7000 Switch CLI.
Chapter 21, “SOLE Instance”
Summarize the (config-sole)instance commands within the RFS7000 Switch CLI.
NOTE Indicates tips or special requirements.
CAUTION Indicates conditions that can cause equipment damage or data loss.
WARNING! Indicates a condition or procedure that could result in personal injury or equipment damage.
Table 1 Quick Reference on How This Guide Is Organized (Continued)
Chapter Jump to this section if you want to...
!