5-49
5.1.28 show
Global Configuration Commands
Use this command to view running system information.
Syntax
show <display parameter>
Parameters
access-list Displays Internet Protocol (IP) details of the access list.
aclstats Displays ACL statistics information.
alarm-log Displays system alarms.
autoinstall Displays autoinstall configuration details.
banner Displays the “Message of the Day” login banner.
boot Displays the boot configuration.
clock Displays the system clock.
commands Displays the command lists.
crypto Displays encryption related commands.
debugging Displays debugging information outputs.
dhcp Displays the DHCP Server configuration.
environment Displays environmental information.
file Displays filesystem information.
ftp Displays the FTP Server configuration.
history Displays the session command history.
interfaces Displays an interface status.
ip Displays the Internet Protocol (IP) address.
ldap Displays the LDAP server configuration.
licenses Displays installed licenses details.
logging Displays logging configuration and buffer data.
mac Displays MAC access-list assignment details.
mac-address-table Displays the MAC address table.
management Displays L3 Managment Interface name details.
mobility Displays mobility parameters.
ntp Displays network time protocol.
password-encryption Displays password encryption.
To Next Page
Loading...
Need help?
General
