Overview
5-38
5.1.21 mac
Global Configuration Commands
Use this command to configure MAC access-lists.
Syntax
mac(access-list(extended(WORD)))
Parameters
Usage Guidelines
To delete a Standard/Extended or MAC ACL, use no access-list <access-list name> under the Global
Config mode.
Example
RFS7000(config)#mac access-list extended Test1
RFS7000(config-ext-macl)#
access-list
(extended <name>)
Enter a name for MAC extended ACL.
NOTE By using the
mac access-list parameter, the following context is supplied:
• ext-macl — Extended MAC ACL. For additional information, see
Extended MAC ACL Instance on page 16-1