5-37
Example
RFS7000(config)#logging aggregation-time 20
RFS7000(config)#
facility Syslog facility in which log messages are sent.
• local0 – Syslog facility local0.
• local1 – Syslog facility local1.
• local2 – Syslog facility local2.
• local3 – Syslog facility local3.
• local4 – Syslog facility local4.
• local5 – Syslog facility local5.
• local6 – Syslog facility local6.
• local7 – Syslog facility local7.
host Configures the remote host to receive log messages.
• A.B.C.D – Remote host's IP address.
monitor Sets the terminal line logging level.
• alerts – Immediate action needed, (severity=1).
• critical – Critical conditions, (severity=2).
• debugging – Debugging messages, (severity=7).
• emergencies – System is unusable, (severity=0).
• errors – Error conditions, (severity=3).
• informational – Informational messages, (severity=6).
• notifications – Normal but significant conditions, (severity=5).
• warnings – Warning conditions, (severity=4).
on Enables the logging of system messages.
syslog Sets the syslog servers logging level.
• alerts – Immediate action needed, (severity=1).
• critical – Critical conditions, (severity=2).
• debugging – Debugging messages, (severity=7).
• emergencies – System is unusable, (severity=0).
• errors – Error conditions, (severity=3).
• informational – Informational messages, (severity=6).
• notifications – Normal but significant conditions, (severity=5).
• warnings – Warning conditions, (severity=4).
To Next Page
Loading...
