Overview
4-16
4.1.10 debug
Priv Exec Command
Use this command for debugging purposes. This command is also used to debug various features.
Syntax
debug all
debug cc [access-port|all|alt|ap-detect|capwap|cluster|
config|dot11|eap|ids|kerberos|l3-mob|media|mobile-unit|radio|
radius|self-heal|snmp|system|wips|wisp]
debug ccstats <CCStats Module>
debug certmgr [all|error|info]
debug dhcpsvr [all|error|info]
debug imi [all|cli-client|cli-server|errors|init|ntp]
debug ip [https|ssh]
debug logging [all|errors|monitor|subagent]
debug mgmt [all|cgi|err|sys]
debug mobility [all|cc|error|forwarding|mu|packet|peer|system]
debug mstp [all|cli|packet|protocol|timer]
debug nsm [all|events|kernel|packet]
debug pktdrvr [rate-limit|skip-packet-filter]
debug pm [all|errors|heartbeats|init|proc|shutdown|subagent|sys]
debug radius [all|err|info|warn]
debug redundancy [all|ccmsg|config|errors|general|heartbeats|
init|packets|proc|shutdown|states|subagent|timer|warnings]
debug securitymgr [all|debug|error|ikeerror|pmdebug|pmerror]
Parameters
all Enables debugging functionalities.
cc Cellcontroller (wireless) debugging messages.
ccstats Cellcontroller (wireless) debugging messages.
certmgr Certificate manager debugging messages.
dhcpsvr DHCP conf server debugging messages.
imi Integrated management interface.
ip Internet protocol (IP).
logging Modifies message logging facilities.
mgmt Management daemon.
mobility L3 mobility.
mstp Multiple spanning tree protocol.
nsm Network Service Module (NSM).
pktdrvr Pktdrvr (kernel wireless) debugging messages.
pm Process monitor.
radius RADIUS server debugging messages.
redundancy Redundancy Protocol debugging messages.
securitymgr Security manager debugging messages.
To Next Page
Loading...
Need help?
General
