Motorola RFS7000 Series - Erase

Overview
4-24
4.1.17 erase
Priv Exec Command
Use this command to erase a target filesystem.
Syntax
erase [cf:|flash:|nvram:|startup-config:]
Parameters
Example
RFS7000#erase ?
cf: Erase everything in cf:
flash: Erase everything in flash:
nvram: Erase everything in nvram:
startup-config Reset configuration to factory default
usb1: Erase everything in usb1:
usb2: Erase everything in usb2:
RFS7000#erase
cf: Erases contents of compact flash.
flash: Erases contents of flash.
nvram: Erases contents of nvram.
startup-config Resets the switch configuration to factory default settings.
usb1: Erases everything in usb1.
usb2: Erases everything in usb2.