Motorola RFS7000 Series - Mobility

20-29
20.1.23 mobility
Wireless Configuration Commands
Use this command to configure mobility parameters
Syntax
mobility(enable|local-address|max-roam-period|peer)
mobility local-address (IP Address)
mobility max-roam-period<1-300>
mobililty peer (IP Address)
Parameters
Example
RFS7000(config-wireless)#mobility enable
RFS7000(config-wireless)#
RFS7000(config-wireless)#mobility local-address 12.12.12.1
RFS7000(config-wireless)#
RFS7000(config-wireless)#mobility max-roam-period 10
RFS7000(config-wireless)#
RFS7000(config-wireless)#mobility peer 157.208.235.108
RFS7000(config-wireless)#
enable Enables mobility globally.
local-address
<IP address>
Sets the local address for mobility.
• A.B.C.D – IP Address of A.B.C.D format.
max-roam-period
<1-300>
Sets the maximum roam period for a mobile unit (in seconds).
peer <Peer IP Address> Adds a peer to this mobility region.
• A.B.C.D – IP address of the Peer.