Motorola RFS7000 Series - Page 534

Overview
20-30
20.1.24 multicast-packet-limit
Wireless Configuration Commands
Use this command to a configure multicast packet limit per second for a VLAN.
Syntax
multicast-packet-limit <0-128> (<1-4094>|<vlan range>)
Parameters
Example
RFS7000(config-wireless)#multicast-packet-limit 120 50
RFS7000(config-wireless)#multicast-packet-limit
RFS7000(config-wireless)#multicast-packet-limit 120 1,10,25 RFS7000(config-
wireless)#multicast-packet-limit
<0-128>
[<1-4094 | <vlan range>]
Multicast packet limit per second.
• <1-4094> – Single VLAN ID (1-4094) that the new limit applies to.
• <vlan range> – A list (1,3,7) or range (3-7 ) of VLAN IDs.