19-9
19.1.7 group
RADIUS Configuration Commands
Use this command to configure RADIUS user groups. The CLI moves to a sub-instance config-radsrv-group,
to create a new group.
The prompt changes from
RFS7000(config-radsrv)# to RFS7000(config-radsrv-group)#.
Table 19.2 summarizes the RADIUS User Group commands within the (config-radsrv-group) sub-
instance.
Table 19.2 RADIUS User Group Configuration Command Summary
19.1.7.1 clrscr
RADIUS Configuration Commands
Use this command to clear the display screen.
Syntax
clrscr
Parameters
None.
Example
RFS7000(config-radsrv-group)#clrscr
RFS7000(config-radsrv-group)#
Command Description Ref.
clrscr Clears the display screen. page 19-9
end Ends the current mode and changes to the EXEC mode. page 19-10
exit Ends the current mode and moves to the previous mode. page 19-10
group Configures RADIUS user group paramaters. page 19-10
guest-group Guest group configuration. page 19-11
help Describes the interactive help system. page 19-11
no Negates a command or set its defaults. page 19-11
policy RADIUS group access policy configuration. page 19-12
rad-user Adds a RADIUS user to a group. page 19-14
service Service Commands. page 19-14
show Shows running system information. page 19-15
To Next Page
Loading...
