Overview
5-46
Example
RFS7000(config)#redundancy discovery-period 20
RFS7000(config)#
RFS7000(config)#redundancy handle-stp enable
RFS7000(config)#
RFS7000(config)#redundancy heartbeat-period 20
RFS7000(config)#
RFS7000(config)#redundancy hold-period 25
RFS7000(config)#
RFS7000(config)#redundancy mode primary
RFS7000(config)#
member-ip Adds a member to this redundancy group.
• A.B.C.D – IP address of the member.
mode Sets the switch mode to either primary or standby.
• primary – Defines mode as primary.
• standby – Defines mode as standby.
To Next Page
Loading...
