Overview
4-38
Usage Guidelines
Refer to show on page 2-28 for additional information.
Example
RFS7000#show ?
access-list Internet Protocol (IP)
aclstats Show ACL Statistics information
alarm-log Display all alarms currently in the system
autoinstall autoinstall configuration
banner Display Message of the Day Login banner
boot Display boot configuration.
clock Display system clock
commands Show command lists
crypto encryption module
debugging Debugging information outputs
dhcp DHCP Server Configuration
port-channel Displays Port channel commands.
privilege Displays the current privilege level.
radius Displays RADIUS configuration commands.
redundancy-group Displays redundancy group parameters.
redundancy-history Displays the state transition history of the switch.
redundancy-members Displays redundancy group members in detail.
running-config Displays the current operating configuration.
securitymgr Displays securitymgr parameters.
sessions Displays current active open connections.
snmp Displays SNMP engine parameters.
snmp-server Displays SNMP engine parameters.
sole Displays Smart Opportunistic Location Engine (SOLE) configurations.
spanning-tree Displays spanning tree information.
startup-config Displays the contents of the startup configuration.
static-channel-group Displays static channel group membership.
terminal Displays terminal configuration parameters.
timezone Displays the timezone setting defined for the switch.
upgrade-status Displays the last image upgrade status.
users Displays active user information.
version Displays software and hardware version details.
wireless Displays wireless configuration commands.
wlan-acl Displays WLAN based ACL details.
To Next Page
Loading...
Need help?
General
