5-29
Parameters
access-list Use the access list parameter to enter the ext-nacl context and std-nacl
context. The prompt changes to the context entered.
For additional information, see Extended ACL Instance on page 14-1 (for
extended ACLs) and Standard ACL Instance on page 15-1 (for standard ACLs).
default-gateway Configures the default gateway.
• A.B.C.D – IP gateway address.
dhcp DHCP Server configuration.
• bootp – BOOTP specific configuration.
• ignore – Configures the DHCP Server to ignore BOOTP requests.
• class – Defines a DHCP class and enters DHCP class configuration mode.
• WORD – DHCP class name.
• excluded-address – Prevents the DHCP Server from assigning certain
addresses.
• A.B.C.D – Low IP Address.
• option – Defines the DHCP server option name.
• ping – Specifies the ping parameters used by DHCP server.
• timeout – Specifies a ping timeout between 1-10 seconds.
• pool – Configures the DHCP Server address pool.
• restart – Restarts DHCP Server to get the DHCP config changes into
effect.
domain-lookup Enables DNS based name - to - address translation on the switch.
domain-name Sets the domain name for the switch.
http Hyper Text Transfer Protocol (HTTP).
• secure-server – Secure HTTP server (HTTPS).
• secure-trustpoint – Enter the name of the trustpoint to be used for secure
connection.
• server – HTTP server.
name-server Specify the DNS server for the DHCP client. A maximum of 6 name servers can
be configured. Servers are tried in the order entered.
• A.B.C.D – IP address of Name Server to add.
To Next Page
Loading...
Need help?
General
