Motorola RFS7000 Series User Manual

Crypto - map Instance
config-crypto-map CLI commands are used to define a Certificate Authority (CA) trustpoint. This is a
seperate instance by itself but belongs to the
crypto pki trustpoint mode under config instance.
10.1 Crypto Map Config Commands
Table 10.1 summarizes the config-crypto-map commands within the RFS7000 Switch command line
interface. T
Table 10.1 Crypto Map Command Summary
Command Description Ref.
clrscr
Clears the display screen.
page 10-2
end
Ends the current mode and moves to the EXEC mode.
page 10-3
exit
Ends the current mode and moves to previous mode.
page 10-4
help
Displays the interactive help system.
page 10-5
match
Match values.
page 10-6
no
Negates a command or set its defaults.
page 10-7
service
Displays service commands.
page 10-8
set
Sets values for encryption/decryption.
page 10-9
show
Shows running system information.
page 10-12

Motorola RFS7000 Series Specifications

General

Brand	Motorola
Model	RFS7000 Series
Category	Switch
Language	English