Extended ACL Instance
Use the(config-ext-nacl) instance to configure ip access-list extended ACLs..
14.1 Extended ACL Config Commands
Table 14.1 summarizes the config-ext-nacl commands.
Table 14.1 Extended ACL Config Command Summary
Command Description Ref.
clrscr Clears the display screen. page 14-2
deny Specifies packets to reject. page 14-3
end Ends the current mode and changes to the EXEC mode. page 14-7
exit Ends the current mode and moves back to the previous mode. page 14-8
help Displays the interactive help system. page 14-9
mark Specifies packets to mark. page 14-10
no Negates a command or set default values. page 14-14
permit Specifies packets to forward. page 14-15
service Service commands. page 14-19
show Shows running system information. page 14-20
terminal Sets terminal line parameters. page 14-22