Overview
2-12
2.1.5 no
Common Commands
Use this command to negate a command or set its defaults.
Syntax
no
Parameters
None.
Example (User Exec)
RFS7000>no ?
cluster-cli Cluster context
debug Debugging functions
page Toggle paging
service Service Commands
RFS7000>no
Example (Priv Exec)
RFS7000#no ?
cluster-cli Cluster context
debug Debugging functions
page Toggle paging
service Service Commands
upgrade Name of the patch to remove
RFS7000#no
Example (Global Config)
RFS7000(config)#no ?
aaa VPN AAA authentication settings
access-list Configure access-lists
autoinstall autoinstall configuration command
banner Reset login banner to nothing
bridge Bridge group commands.
country-code Clear the currently configured country code. All existing
radio configuration will be erased
crypto encryption module
errdisable errdisable
ftp Configure FTP Server
hostname Reset system's network name to default
interface Delete a virtual interface
ip Internet Protocol (IP)
line Configure a terminal line
local Local user authentication database for VPN
logging Modify message logging facilities
mac MAC configuration
management sets properties of the management interface
ntp Configure NTP
prompt Reset system's prompt
radius-server RADIUS server configuration commands
redundancy Configure redundancy group parameters
service Service Commands
snmp-server Modify SNMP engine parameters
spanning-tree Spanning tree
timezone Revert the timezone to default (UTC)
username Establish User Name Authentication
vpn vpn
wlan-acl Remove an ACL from WLAN
RFS7000(config)#no
Example (Others)
RFS7000(config)#no bridge multiple-spanning-tree