Motorola RFS7000 Series User Manual

Overview
17-4
17.1.2 bootfile
DHCP Config Commands
Use this command to assign a bootfile name for the DHCP configuration on the network pool.
Syntax
bootfile <filename>
Parameters
Usage Guidelines
Use the bootfile command to specify the boot image. The boot file contains the boot image name used for
booting the bootp clients (DHCP clients). Only one boot file is allowed per pool.
Use
[no] bootfile command to remove the bootfile. Do not use the <file name> with the bootfile command
as only one bootfile exists per pool. The command
[no] bootfile will remove the exisitng command from
the pool.
Example
RFS7000(config-dhcp)#bootfile bootexample.txt
RFS7000(config-dhcp)#
bootfile <filename> Indicates the boot image for bootp clients. The file name can contain letters,
numbers, dots and hyphens. Consecutive dots and hyphens are not permitted.

Motorola RFS7000 Series Specifications

General

Brand	Motorola
Model	RFS7000 Series
Category	Switch
Language	English